Since the operating systems are already loaded, would the F12 method of selecting boot drive locations suffice? thank you! I know a lot of people who are hitting this page are having various issues getting their SATA drives setup aside from just needing to know how to load the drivers Please keep in mind that this works for MY configuration of drives as listed. Check This Out
TWO SATA Drives - want an OS on each, dual boot menu upon boot up.1. No prob til I decided to upgrade to a bigger SATA on Win 7. Mar 14, 2002 #10 ShadowMist TS Rookie How did you dual boot 2 XP Drives on one machine Th3M1ghtyD8 How did you dual boot one machine with 2 XP drives please? You will also need access to another system with Windows already installed so you can run your motherboard CD and create your drivers disk.
We do not need to worry about those versions of the program unless we are installing our SATA drives in a RAID setup. Note the "1" instead of "0" for the "rdisk" value. I'd have to change the boot order in the BIOS. edit this post Log in or Sign up Tech Support Guy Home Forums > Operating Systems > Windows XP > Computer problem?
Thanks rwright0890Oct 31, 2013, 3:48 AM I am actually asking about a similar situation:I had a Dell computer running XP from a SATA HD. Once I explore the disk it gives me several folders: BIN DRIVERS LINUXDRIVERS MANUAL SOFTWARE In this case I am going to check in the "DRIVERS" folder as this is the And, I'm embarrassed to say, I couldn't understand when I started the XP install, whether to format the partition. Windows Xp Install Can't Find Hard Drive If you had changed the bios to AHCI or RAID, then the XP install would have failed without using the F6 additional drivers step.
The drive is OK, as it still boots fine in the old computer.I am suspecting that I need some specific drivers for the new motherboard, but the new computer came with Windows Xp Install Not Detecting Hard Drive They are set to cable select (per Dell instructions). IMPORTANT: All the desktop and start menu shortcuts still pointed to C: drive, so even though I had booted to and was "running" on the spare D: drive, the programs still my interpretation (or mis-interpretation) is that the DVD drive could be reading fine while XP install was in the initial set up phase of reading kernal files and drivers, but when
Solved my problem...... Hard Drive Not Detected While Installing Windows 7 Windows 7 works from the dual boot menu. Site Changelog Community Forum Software by IP.Board Sign In Use Facebook Use Twitter Need an account? Dont know if this is solution for genuine AHCI - issues, but it might be the solution for some of You also who found this thread. // Peter Was this answer
Leave it out altogether if you have not done this. Dual boot windows 7 on two drives Two hard-drives, both windows 7, choose boot drive? Dual Boot Windows 7 And Xp Windows 7 Installed First I finally got the upgrade and installation completed. Sata Hard Disk Drivers For Windows Xp Download NVIDIA CHIPSET INSTRUCTIONS: [VIA INSTRUCTIONS BELOW] The first thing you will need to do to create your SATA drivers disc on a bootable floppy is setup a floppy disc to copy
Join the community here. http://premiumtechblog.com/hard-drive/hard-drive-detected-in-bios-but-won-39-t-boot.html Boot up your XP install disk and install XP. edit: I remember a bit more on this- on first starting up, instead of starting up normally it went to a black screen with a white dashed line on the bottom. We will cover how to create an nVidia SATA or VIA SATA drivers disk depending on your chipset. Windows Xp Not Recognizing External Hard Drive
I could boot to XP or Win7So, the pc was upon my work table, I brought it down to its place on the floor under my desk very gently. Motherboard Specs Louis Edited by hamluis, 14 March 2014 - 11:27 AM. You ran a diagnostic on it? http://premiumtechblog.com/hard-drive/computer-won-39-t-boot-with-second-hard-drive.html Thank you very much.
otsileteo Says: June 1st, 2010 at 6:12 am i would like to know if you have a smallest netbook hardrive? Dual Boot Windows 7 And Xp Separate Hard Drives http://support.microsoft.com/kb/916196 My floppy drive is a TEAC, at least one TEAC model is useful according to that doc, but I can't tell which model mine is. I read really carefully your manual.
Originally posted by ladyups Second, should I disconnect all my peripherals before I start the clean install of XP and then load them back on one at time? By booting from my XP cd, you are saying to put my cd in the drive and boot up, correct? Now when I boot from the spare drive, I can tell instantly that it's the one I'm running on. Setup Did Not Find Any Hard Disk Drives Installed In Your Computer Definitely always make another image before you install any new software.
If you cannot get it off the motherboard, you may be able to use the HDT utility on the bootable Ultimate Boot CD In order for XP to see the Not there when booting to the C: drive. Worth every $ (300 of them...) and works wonders. navigate here Ask a question and give support.
I have an ASUS M2N32-SLI deluxe board. All Rights Reserved. Facebook Twitter YouTube Instagram Hardware Unboxed Google+ Subscribe to TechSpot RSS Get our weekly newsletter Search TechSpot Trending Hardware The Web Culture Mobile Gaming Apple Microsoft Google Reviews Graphics Laptops Smartphones I have a clean blank other SINGLE (SATA) hard drive upon which I will install Windows XP Professional (32-bit).3.
Should not be. Login now. I did put in the Windows 7 disk and reboot as I had that on SATA 1 but it just hung on the sky blue screen with the dove and vines.If Install Drive II in the machine.
Install XP on IDE HD 4. thanks man.. If so that is the one you will want to go with.
© Copyright 2017 premiumtechblog.com. All rights reserved.